DreamTeamDownloads1, FTP Help, Movies, Bollywood, Applications, etc. & Mature Sex Forum, Rapidshare, Filefactory, Freakshare, Rapidgator, Turbobit, & More MULTI Filehosts

DreamTeamDownloads1, FTP Help, Movies, Bollywood, Applications, etc. & Mature Sex Forum, Rapidshare, Filefactory, Freakshare, Rapidgator, Turbobit, & More MULTI Filehosts (http://www.dreamteamdownloads1.com/index.php)
-   General Computer/Android Help, News & Info + New Technology (http://www.dreamteamdownloads1.com/forumdisplay.php?f=97)
-   -   error msg, 0x80070570 (http://www.dreamteamdownloads1.com/showthread.php?t=167450)

pop 28-12-11 03:47

error msg, 0x80070570
 
Can someone help me out if it is possable?

I played a vid last nite twice from utorrent, but close everything and had the PC on but not connected, so I could turn moniter on as my lightglobe has blown, anyway I woke up at 2am and turned monitor on to see black and white message saying ( I think this was after I tried to shut down before hand) saying error boot\BCD unreadable, put in windows cd and click repair.

So I did thaT many times to get this error message 0x80070570 on a total new install of vista, but it won't install as it stops and this message shows up and the is noway it will let do a safe mode boot or anything like that, it has locked me out totally.

Any ideas????? I was thinking downloading my motherboard ,burning it and trying that first before I try another in stall?

While I can get my main PC running again I won't be on as much to do my work here as I'm on this OLD laptop thats taken me 7 hours so far to get to this stage to working.

Thanks

pop :(

Ladybbird 28-12-11 04:00

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 202866)
Can someone help me out if it is possable?

I played a vid last nite twice from utorrent, but close everything and had the PC on but not connected, so I could turn moniter on as my lightglobe has blown, anyway I woke up at 2am and turned monitor on to see black and white message saying ( I think this was after I tried to shut down before hand) saying error boot\BCD unreadable, put in windows cd and click repair.

So I did thaT many times to get this error message 0x80070570 on a total new install of vista, but it won't install as it stops and this message shows up and the is noway it will let do a safe mode boot or anything like that, it has locked me out totally.

Any ideas????? I was thinking downloading my motherboard ,burning it and trying that first before I try another in stall?

While I can get my main PC running again I won't be on as much to do my work here as I'm on this OLD laptop thats taken me 7 hours so far to get to this stage to working.

Thanks

pop :(


Send a pm to DMan, pop, hes the man as far as computers go :) Refer him to post his replies in this thread, so we can all learn please.

pop 28-12-11 04:19

Re: error msg, 0x80070570
 
OK Thanks LBB.

DMan999 28-12-11 04:44

Re: error msg, 0x80070570
 
Error 0x80070570: The file or directory is corrupted and unreadable.


You may have to save any data you need to first, then repartition the drive and reformat it the slow way to see if it has any bad blocks. There are boot disks like UBCD or HiRen that'll help you with that if you don't have a way to run FDisk and if the boot CD doesn't allow you to manuall re-partition and format the drive to kill all that is currently on it. If it formats in seconds, it is fast formatting, if it takes a while, like 10 mins to an hour, that is what we seek, a slow format. :)

pop 28-12-11 05:05

Re: error msg, 0x80070570
 
But It won't let me in to save anything, will not boot in safe mode or anything like that, There is no boot file it can read or find on disk, have to boot by cdrom by F12?

DMan999 28-12-11 05:10

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 202899)
But It won't let me in to save anything, will not boot in safe mode or anything like that, There is no boot file it can read or find on disk, have to boot by cdrom by F12?


Yes, you will have to boot from a CDROM with the ability to transfer files. a Live Linux Distro very well may work as well. :) Perosnally, I have a USB Hard disk I have windows ME on. and also an ERD Commander disk for that.

pop 28-12-11 05:13

Re: error msg, 0x80070570
 
I have ME and XP on disk if that would help get me in?

DMan999 28-12-11 05:26

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 202902)
I have ME and XP on disk if that would help get me in?


Generally, they aren't LIVE versions where you can boot to a desktop. Unless you downloaded a live version. MSDart 6.5 (ERD Commander) is the newest version that I know of. the 2005 version doesn't like SATA drives and was for XP. I think the new one is 2009 or 2011 but I can't find infor in the ERD Commander versions, but it's made from MSDart 6.5.


Unless you understand that, I'd go for UBCD. I couldn't find it on here, nor a live version that was still active. utorrent should have some good ones though.

pop 28-12-11 05:49

Re: error msg, 0x80070570
 
Thanks, just read up on ERD 6.5 now I'll read about UBCD and if nothing comes of it I'll shove in Kill Disk and suffer my lost stuff. I think I do have a recovery disk of some sort from years ago, never used it and have to look thru 100's of disks.

I think img burn had something to do with this while trying to make a bootable disk?

I'll let you know how I go.....

Thanks mate....

DMan999 28-12-11 05:55

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 202912)
Thanks, just read up on ERD 6.5 now I'll read about UBCD and if nothing comes of it I'll shove in Kill Disk and suffer my lost stuff. I think I do have a recovery disk of some sort from years ago, never used it and have to look thru 100's of disks.

I think img burn had something to do with this while trying to make a bootable disk?

I'll let you know how I go.....

Thanks mate....


yes, ImgBurn or CDBurner XP are great ISO burners and the latter a copier as well.

Code:

http://www.ultimatebootcd.com/download.html

I am guessing that you may have a corrupted disk (maybe bad blocks too), so you should remove the partition, then create a primary with max size, then reformat it without the quick option.

DMan999 28-12-11 14:46

Re: error msg, 0x80070570
 
I hope that worked for you. Let us know.

Ladybbird 28-12-11 21:32

Re: error msg, 0x80070570
 
Gee you guys are clever, I havent a clue,,,,,,,just about figured out that USB thingey!!! LOL

Ive started a new thread about ERD Commander DMan when you have time can you please explain about it

Thanks

pop 29-12-11 02:39

Re: error msg, 0x80070570
 
I'm not clever Ladybbird, I don't know nothing about computers, I njust try things that are suggestured to me not knowing if it will blow my PC up and my house or work LOL

Anyway off to find out about UBCD now.

pop 29-12-11 02:45

Re: error msg, 0x80070570
 
Quote:

Originally Posted by DMan999 (Post 202914)
yes, ImgBurn or CDBurner XP are great ISO burners and the latter a copier as well.

Code:

http://www.ultimatebootcd.com/download.html

I am guessing that you may have a corrupted disk (maybe bad blocks too), so you should remove the partition, then create a primary with max size, then reformat it without the quick option.

Does this mean I have lost my data already, or can I retrive some of it before I wipe the whole drive?

I did get a blue screen afew weeks ago, but it recovered by it self, so I didn't bother to do anything about it...

DMan999 29-12-11 04:38

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 203519)
Does this mean I have lost my data already, or can I retrive some of it before I wipe the whole drive?

I did get a blue screen afew weeks ago, but it recovered by it self, so I didn't bother to do anything about it...

As long as the Hard disk isn't shot, you should be able to get your documents, etc before you re-partition, format and then reload Windows.

pop 30-12-11 05:07

Re: error msg, 0x80070570
 
OK an update, after installing a heap of programs on this OLD lap top, I think Im running on 128 ram so slow, but now trying to burn UBCD with ultimatecdcc (I think I got the names right) the burner keeps saying put blank disk in.......I've done that muliti times so now I don't know what to do....

I can get into the boot page and all that stuff that comes up with it in blue/yellow on troubled computer if that helps at all?

DMan999 30-12-11 14:35

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 204059)
OK an update, after installing a heap of programs on this OLD lap top, I think Im running on 128 ram so slow, but now trying to burn UBCD with ultimatecdcc (I think I got the names right) the burner keeps saying put blank disk in.......I've done that muliti times so now I don't know what to do....

I can get into the boot page and all that stuff that comes up with it in blue/yellow on troubled computer if that helps at all?

Not if you can't get in to Safe Mode on the troubled PC? 128MB of RAM isn't very much these days, Are you running XP on that? I think XP even recommended 512K.


Do you have anyone else that could burn it for you? If so, put the UBCD iso on to a USB thumb stick.


I can't say for sure, but it sounds like you may have a CD Burner going bad. You could try cleaning the laser if you know how to do it, or if you have a cleaning disc.

DMan999 01-01-12 01:18

Re: error msg, 0x80070570
 
Any update on this pop?

pop 01-01-12 21:33

Re: error msg, 0x80070570
 
No not yet Dman, I will give it another go today, I have a feeling I have to open the ISO with the burner, because if I click open it , it brings up nero, so I'll try and open it with the other burning program first, than if that don,t work will try a memory stick.

And running XP on this and takes mso long to open up firefox, than no more than two tabs open at a time or it freezers.......I need my mother PC back!!!!!!! :)

I should go back and read the spiecal tutorial on burning this right, as it said if you don't read it you will end up making a heap of coasters, so I,ll go and read it!!!! Its just taking so long to do this as I have to add utorrent onto this PC as with other programs 7zip etc, as I have than all on other pc and nothing on this one, so thats why its taking me so long:( :(

and sorry LBB for not modding at the moment as yoou can see why.

pop 01-01-12 21:59

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 204059)

I can get into the boot page and all that stuff that comes up with it in blue/yellow on troubled computer if that helps at all?

I found away to get into there by pressing the delete button right after pressing the start up button and it takes me there, but I don't know what to do in there, like booting from a memory stck or if there is anything else I could change.???,

DMan999 03-01-12 14:48

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 205245)
I found away to get into there by pressing the delete button right after pressing the start up button and it takes me there, but I don't know what to do in there, like booting from a memory stck or if there is anything else I could change.???,

Once you get the CD burned, your PC would have to be set to boot from CDROM before the HDD. Most BIOS's allow that feature these days. Usually it's F1, F2, Delete or a similar key to get in to the BIOS then look for Boot Order or something similar.

pop 04-01-12 23:40

Re: error msg, 0x80070570
 
waawoo I have finally been able to burn cd, just made about 5 dvd coasters, than I thought about using a blank cd which too me 2 hrs to find a blank on and change afew things to get the raw image to burn and its DONE!!!

Now in troubled PC it has all these different options to choose from from, so I guess I'll try a few that sounds ok to me and see what happen's????

Wish me luck and thanks. Dman.

The Ethereal Being & Barbara 05-01-12 05:57

Re: error msg, 0x80070570
 
What about moving? Many who get into difficulties start thinking I have to burn something or I will lose it, yet give no thought to moving it to a the EXT HDD (large one - 500Mb to 1Tb). Not always mind you, but sometimes when things go wrong it will affect the burning capabilities but not the moving function. Albeit Pop it is going to be slow with 128Mb RAM, but worth it if you want it saved (and it works).

Did you buy W7 or was it promotional, because promotional does go belly up and loses quite often what you are going to need the most. Also on older machines it can be quirky.

Just an added thought...
Windows XP Requirements:
- PC with 300 megahertz or higher processor clock speed recommended; 233 MHz minimum required (single or dual processor system);* Intel Pentium/Celeron family, or AMD K6/Athlon/Duron family, or compatible processor recommended
- 128 megabytes (MB) of RAM or higher recommended (64 MB minimum supported; may limit performance and some features)
- 1.5 gigabytes (GB) of available hard disk space*
Compared to....
Windows7:
- 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
- 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
- 16 GB available hard disk space (32-bit) or 20 GB (64-bit)




It is possible that it could be the memory module. With clean hands, remove the RAM carefully. Have on hand a WHITE rubber (eraser), and clean all those gold teeth in a gentle one way action. Then use a painter's brush and lightly brush off all the residue of the eraser. Check the mobo as well, look inside where you took the ram out, and give that a light brush with the paint brush as well. The slightest bit of dust can screw things up. Then give the RAM holder a good blow with your breath and reinstall the RAM carefully.
If it fails to work, it could be a conflict issue because info is going everywhere but where its supposed to.

DMan999 05-01-12 14:56

Re: error msg, 0x80070570
 
The Ethereal Being: He's trying to boot from a CD to fix his Windows installation and/or to resurrect his PC. It could be a hardware issue, but he's trying to back his stuff up if possible before he tries to reload the OS which may be corrupted.


Pop: You'll have to find the boot option that allows you to boot from CD/DVD first. Any time you want to make a bootable media you have to use a blank CD.DVD.


What does the blue screen say is malfunctioning when you read it? Could it be a memory error? a CPU Error? A hard disk Error?
Code:

http://www.geekstogo.com/forum/topic/43519-windows-xp-blue-screen-of-death-stop-codes/
If this doesn't work, I'll see if I can find a link for the other program or someone that can find it for you. It'll probably be a torrent though, so it'll take a while to download.


I am hoping that CD (UBCD or Hiren) can either fix your booting issues or have a file manager on it where you can copy files off. I know ERD does.

The Ethereal Being & Barbara 06-01-12 04:04

Re: error msg, 0x80070570
 
I misread Pop's comment, thanks Dman999 for correcting my oversight.
I shall leave this one to you now I have screwed it up entirely.
(yep I agree sounds like a hardware issue).

DMan999 06-01-12 14:46

Re: error msg, 0x80070570
 
Quote:

Originally Posted by The Ethereal Being (Post 207662)
I misread Pop's comment, thanks Dman999 for correcting my oversight.
I shall leave this one to you now I have screwed it up entirely.
(yep I agree sounds like a hardware issue).


No worries EB. I am thinking it's a hard disk issue at this point, but one is never sure, especially when one can't see the offending PC. Thanks for jumping in and helping. a memory or CPU issue would be my next guess. First I want to see if he can get his documents off his PC before it totally fails. and if it boots and runs, we'll know it's more than likely not a CPU issue, it may not be memory and most likely would then be a hard disk issue. Hard disks tend to go more frequently than RAM, but it does happen. People tend to jar PCs when the hard disk is being accesses. since the head is literally right on the platters at that time (3 nanometres), it causes damage. Even worse are laptops when PCs are some times dropped. Talk about some serious jarring. :)


~DMan

DMan999 06-01-12 14:52

Re: error msg, 0x80070570
 
Reading this:


Code:

http://www.wiki-errors.com/wiki-errors.php?wiki=0x80070570

Makes it sound like it's corrupted files and possibly the hard disk or the files themselves.

pop 06-01-12 20:48

Re: error msg, 0x80070570
 
Dman I think we have mixed up things here, the laptop I am currentily on is the old ****ty pc, my normal pc, tower has legel vista on it wityh 2 gigs ran and nivadia 512 ram graphics card, but I have just remembered how I did this error and it was with ccleaner and accidently wiped the boot image itself, so now with this program, which brings up a heap of different options I don't know what to pick or do. I can take pics of it and put them into my folder here if you want,or try to partion drive(thats one choice) thinking I could boot fron windows disk than????
UBCD does have options to click onto like cpu and hdd and and memery as well as folder options. Different types of boot images for lunix and mbr, which I think I need, have tried but than all info comes back in pages of writting which I cannot get to top of page to read, or I can install GRUB or GRUB2 onto the hard disk? This is why I'm not sure what to do other than walk away for a few hours than come back to it.


Yes EB this is what happens when ya get old mate :cheers:

Masterman 07-01-12 01:31

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 208115)
Dman I think we have mixed up things here, the laptop I am currentily on is the old ****ty pc, my normal pc, tower has legel vista on it wityh 2 gigs ran and nivadia 512 ram graphics card, but I have just remembered how I did this error and it was with ccleaner and accidently wiped the boot image itself, so now with this program, which brings up a heap of different options I don't know what to pick or do. I can take pics of it and put them into my folder here if you want,or try to partion drive(thats one choice) thinking I could boot fron windows disk than????
UBCD does have options to click onto like cpu and hdd and and memery as well as folder options. Different types of boot images for lunix and mbr, which I think I need, have tried but than all info comes back in pages of writting which I cannot get to top of page to read, or I can install GRUB or GRUB2 onto the hard disk? This is why I'm not sure what to do other than walk away for a few hours than come back to it.


Yes EB this is what happens when ya get old mate :cheers:

UBCD has some nice utilities to repair hard disks and such, but I PM'd you some good info. MM

DMan999 07-01-12 01:49

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 208115)
Dman I think we have mixed up things here, the laptop I am currentily on is the old ****ty pc, my normal pc, tower has legel vista on it wityh 2 gigs ran and nivadia 512 ram graphics card, but I have just remembered how I did this error and it was with ccleaner and accidently wiped the boot image itself, so now with this program, which brings up a heap of different options I don't know what to pick or do. I can take pics of it and put them into my folder here if you want,or try to partion drive(thats one choice) thinking I could boot fron windows disk than????

Quote:

Originally Posted by pop (Post 208115)
UBCD does have options to click onto like cpu and hdd and and memery as well as folder options. Different types of boot images for lunix and mbr, which I think I need, have tried but than all info comes back in pages of writting which I cannot get to top of page to read, or I can install GRUB or GRUB2 onto the hard disk? This is why I'm not sure what to do other than walk away for a few hours than come back to it.


Yes EB this is what happens when ya get old mate :cheers:


There isn't an option on CCleaner that'd mess up your booting my friend. I don't doubt you have some kind of issue, whether it is a corrupted file or a hardware issue isn't know yet for sure. We're just hoping to get your stuff off the drive and backed up, then you can wipe and reload. Hiren has some utilities where you can copy/back up files. It'd been a better option for you to have downloaded.

UBCD has PhotoRec and TestDisk that may do something for you. I had a special version of UBCD that was also a bootable version of windows PE, it was a hybrid of some sort. :) There are several partition management programs on it. I'd try Ranish Partition Manager myself.

I'd recommend backing up, then use UBCD to wipe all your partitions and re-make them. Don't forget to make a Primary Partition and set it Active. I'd recommend only one drive unless you have a huge drive. i.e. bigger than 500GB and to format it NTFS.

After that, just reload your Windows and see if it takes. with any luck, you won't have any more issues. If you do, we'll tackle it at that point knowing your install should have been good.

pop 08-01-12 00:53

Re: error msg, 0x80070570
 
Materman sent me a copy of ERD Comander to download, I should try that before, or just back up from UBCD,,,,ON external drive, my c drive is full......But I might have what I want on my external drive anyway...Hopefully, and ERD is gone already.....

DMan999 08-01-12 02:20

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 208888)
Materman sent me a copy of ERD Comander to download, I should try that before, or just back up from UBCD,,,,ON external drive, my c drive is full......


I'd use ERD Commander, it'd make backing up easier for you. UBCD would be better to diagnose and partition your drive. Your Windows install should have partition and format options too; probably under an advanced install button or similar.

pop 10-01-12 03:47

Re: error msg, 0x80070570
 
OK so I have downloaded ERD and unrar'ed it to get another rariso unpacked, when I clicked on it, program ultimatecd.. came up and I didn't think that would burn a rar iso file, so I did a single extraction now all this other stuff has come up, but nothing I recongonise like a raw image file.(iso)

The only way I can show you is with iviewer unless you know of something else?

DMan999 10-01-12 04:14

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 210530)
OK so I have downloaded ERD and unrar'ed it to get another rariso unpacked, when I clicked on it, program ultimatecd.. came up and I didn't think that would burn a rar iso file, so I did a single extraction now all this other stuff has come up, but nothing I recongonise like a raw image file.(iso)

The only way I can show you is with iviewer unless you know of something else?


What did you use to Unrar the file. usually I'd expect it to be an .iso file and not a .rar.iso that doesn't sound right. Try using winrar or Iceows to unrar it.

pop 10-01-12 05:00

Re: error msg, 0x80070570
 
I did use winrar to extract 2 parts, than that left me with the unpacked rariso?????

pop 10-01-12 21:16

Re: error msg, 0x80070570
 
I'm just going to wipe HDD and start again, I hate this laptop, so slow.

But I will work on burning the ERD commander, I just need time to show you what comes up, with pics I mean.

Thanks

pop

DMan999 11-01-12 01:47

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 211053)
I'm just going to wipe HDD and start again, I hate this laptop, so slow.

But I will work on burning the ERD commander, I just need time to show you what comes up, with pics I mean.

Thanks

pop


If you right click and extract the rar.iso do you get actual files from withing the archive? If so, that is the .iso you would burn.


OK good luck. please let us know how it goes!!

pop 15-01-12 18:58

Re: error msg, 0x80070570
 
Quote:

Originally Posted by DMan999 (Post 211184)
If you right click and extract the rar.iso do you get actual files from withing the archive? If so, that is the .iso you would burn.


OK good luck. please let us know how it goes!!

If I do that like I have it brings up Burncdcc or nero straight away, so I can't get around that???

Anyway loading OS onto other PC at the moment.

DMan999 16-01-12 03:59

Re: error msg, 0x80070570
 
Quote:

Originally Posted by pop (Post 214236)
If I do that like I have it brings up Burncdcc or nero straight away, so I can't get around that???

Anyway loading OS onto other PC at the moment.

That's what you'd want is to burn it to a disc. Let us know how the load goes.

pop 19-01-12 00:36

Re: error msg, 0x80070570
 
Load went well just setting it all up AGAIN, which takes as long as Ladybbird takes to think its taken me long enough and to go back to clean up my section which has been servilely dejected :hide: I was thinking of closing my whole section down for awhile the other day has its becoming the most popular section on this board, but thin worried about LBB?????? LOL...

But I want to set this one up probably, instead of having everything everywhere like the insides of a females handbag.

pop 19-01-12 00:45

Re: error msg, 0x80070570
 
Quote:

Originally Posted by DMan999 (Post 214520)
That's what you'd want is to burn it to a disc. Let us know how the load goes.

You can't burn a rar.iso file so that one has me stumped????

DMan999 19-01-12 01:31

Re: error msg, 0x80070570
 
There's no such thing as a rar.iso. an .iso is an .iso. If it's really an .iso it can be burned by imgburn. I'm not there so I can't see what you have. If you have winrar, try extracting it and see if you get a directory full of files. If you do, it's an .iso and can be burned.


All times are GMT. The time now is 22:21.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO 3.5.2